- ahmeed333
عدد الرسائل : 33
العمر : 53
العمل/الترفيه : enseignant
نقاط النشاط : 0
نقاط : 0
تاريخ التسجيل : 15/09/2008
فلاش طابعة canon
الثلاثاء 11 نوفمبر 2008 - 22:53
هل من فلاش لطابعات CANON ?
رد: فلاش طابعة canon
الأربعاء 12 نوفمبر 2008 - 22:49
الرجاء عمل ما يوجد في النص الانكليزي
My pixma IP1000 has messages "Waste Ink Full"
I try to reset with manual service mode :
- Turn off the printer, and disconnect the printer cable
- Press and hold the POWER button, turn on the printer
- The Indicator (LED) should be green
- Press and release the RESUME button, the Indicator (LED) should be orange
- Press and release the RESUME button again, the Indicator (LED) should be green
- Release both button
After I try, it work successfull. But, when I turn off the printer and I turn on again I has messages "Waste Ink Full"
How to reset permanently? Averybody, anybody, when you have another service mode help me on my printer ploblem
Thank's
I've tried this one and success, thank you :-)
4 step to Reset waste ink tank counter CANON PIXMA iP 1000
STEP 1:- Disconnect printer from AC power
STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
STEP 3:- release the the POWER button
STEP 4:- Press the POWER button again
Here's the steps for reseting "Waste Ink Full" problem at iP1000
Step 1: Manual for Service mode (1st method)
1. Unplug POWER and USB cables.
2. Open door, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)
Step 1: Manual for Service mode (2nd method)
1. Unplug POWER and USB cables.
2. PRESS and HOLD the POWER button,
3. Connect the POWER cable.
3. Release the the POWER button
4. Power ON your printer a usual (It should not blinking anymore)
Step 2 : Software for Permanant (1st method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1000",
http://www.printersiam.com/data/down...ice%20Tool.zip
3. Select (USB PORT)
4. Choose (SET DESTINATION 1)
It should be reseted already, but somehow it start blinking again if
you ever unpluging AC POWER cable. So try the 2nd method by using
ServiceTool for IP1500
Step 2 : Software for Permanant (2nd method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1500",
http://www.printersiam.com/data/down...ice%20Tool.zip
3. Select (USB PORT)
4. Choose CLEAR WASTE INK COUNTER - MAIN
5. Choose CLEAR WASTE INK COUNTER - PLATEN
It should be working, coz my printer now now work normally
I tell you what. Before you decide to reseting the waste ink counter,
you should really clean up the ink absorber, or else you will find the
ink watse absorber overflow
My pixma IP1000 has messages "Waste Ink Full"
I try to reset with manual service mode :
- Turn off the printer, and disconnect the printer cable
- Press and hold the POWER button, turn on the printer
- The Indicator (LED) should be green
- Press and release the RESUME button, the Indicator (LED) should be orange
- Press and release the RESUME button again, the Indicator (LED) should be green
- Release both button
After I try, it work successfull. But, when I turn off the printer and I turn on again I has messages "Waste Ink Full"
How to reset permanently? Averybody, anybody, when you have another service mode help me on my printer ploblem
Thank's
I've tried this one and success, thank you :-)
4 step to Reset waste ink tank counter CANON PIXMA iP 1000
STEP 1:- Disconnect printer from AC power
STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
STEP 3:- release the the POWER button
STEP 4:- Press the POWER button again
Here's the steps for reseting "Waste Ink Full" problem at iP1000
Step 1: Manual for Service mode (1st method)
1. Unplug POWER and USB cables.
2. Open door, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)
Step 1: Manual for Service mode (2nd method)
1. Unplug POWER and USB cables.
2. PRESS and HOLD the POWER button,
3. Connect the POWER cable.
3. Release the the POWER button
4. Power ON your printer a usual (It should not blinking anymore)
Step 2 : Software for Permanant (1st method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1000",
http://www.printersiam.com/data/down...ice%20Tool.zip
3. Select (USB PORT)
4. Choose (SET DESTINATION 1)
It should be reseted already, but somehow it start blinking again if
you ever unpluging AC POWER cable. So try the 2nd method by using
ServiceTool for IP1500
Step 2 : Software for Permanant (2nd method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1500",
http://www.printersiam.com/data/down...ice%20Tool.zip
3. Select (USB PORT)
4. Choose CLEAR WASTE INK COUNTER - MAIN
5. Choose CLEAR WASTE INK COUNTER - PLATEN
It should be working, coz my printer now now work normally
I tell you what. Before you decide to reseting the waste ink counter,
you should really clean up the ink absorber, or else you will find the
ink watse absorber overflow
رد: فلاش طابعة canon
الأربعاء 12 نوفمبر 2008 - 22:49
فلاش الطابعة
canon ip1000
http://www.savefile.com/files/1045774
User guide:
canon ip1000
http://www.savefile.com/files/1045774
User guide:
- Unzip downloaded file.
- Run GeneralTool.exe
- Select the connected USB port number from USB port
- Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
- In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected
waste ink counter will be reset. MAIN resets the main waste ink
counter, PLATEN resets the platen waste ink counter
- عرعار
عدد الرسائل : 62
العمر : 67
العمل/الترفيه : الترفيه
نقاط النشاط : 0
نقاط : 24
تاريخ التسجيل : 08/10/2008
رد: فلاش طابعة canon
الثلاثاء 25 نوفمبر 2008 - 22:45
مشكور اخينا على المجهود وهل لك ان تزودنا بفلاش طابعة كانون 1800
- عرعار
عدد الرسائل : 62
العمر : 67
العمل/الترفيه : الترفيه
نقاط النشاط : 0
نقاط : 24
تاريخ التسجيل : 08/10/2008
رد: فلاش طابعة canon
الثلاثاء 25 نوفمبر 2008 - 22:48
الى الاخ المحترم زيراوي مشكور اخينا على المجهود وهل لك ان تزودنا بفلاش طابعة كانون 1800
- عرعار
عدد الرسائل : 62
العمر : 67
العمل/الترفيه : الترفيه
نقاط النشاط : 0
نقاط : 24
تاريخ التسجيل : 08/10/2008
رد: فلاش طابعة canon
الأربعاء 26 نوفمبر 2008 - 15:55
شكر اخي على المساعدة
- PRINCE PC
عدد الرسائل : 600
العمر : 43
العمل/الترفيه : tech - s
نقاط النشاط : 7
نقاط : 89
تاريخ التسجيل : 19/02/2008
رد: فلاش طابعة canon
الأربعاء 3 ديسمبر 2008 - 19:50
على حسب خبرتي طريقة الفلاش لطابعات كانون ليست ببرنامج
يكفيك أخي أن تبقى ضاغط على الزران مع بعضهما مدة 30ثانية وأعد الكرة
ستقوم تلقائيا بإستعادة المصنع
يكفيك أخي أن تبقى ضاغط على الزران مع بعضهما مدة 30ثانية وأعد الكرة
ستقوم تلقائيا بإستعادة المصنع
- علي بن عايشة
عدد الرسائل : 1
العمر : 33
العمل/الترفيه : طالبة
نقاط النشاط : 0
نقاط : 0
تاريخ التسجيل : 08/01/2009
مشكوووووووووووووووووور
الخميس 8 يناير 2009 - 1:10
السلام عليك
ممكن الشرح بالعربي
ممكن الشرح بالعربي
صلاحيات هذا المنتدى:
لاتستطيع الرد على المواضيع في هذا المنتدى